Product precautions
This page lists precautions for each item and material.
If you have any questions, please contact us via the contact page .
If you have any questions, please contact us via the contact page .
table of contents
- About color and texture
- About plating
- Regarding meter reading equipment
- About the lining
- About interlining
- About shoulder pads
- About Slake
- About sheeting
- About sewing tape
- About the Inside Belt
- About Rubber
- Metal-plated buttons
- About genuine buffalo buttons
- About Covered Buttons
- About the ribbon
- About the tape
- About Blade
- About the cord
- About zippers
- About locking hooks
- About Magnets
- About imitation pearls
- About lacto (casein) ingredients
- About urea resin materials
- About nylon material
- About acrylic resin materials
- About leather materials
- About natural wood materials
- About natural materials
- About epoxy resin materials
- About polyacetal material
- About polycarbonate material
- About polypropylene material
- About polyurethane material
- About silk material
- About Ranm sales products
About color and texture
- The actual color may differ slightly depending on the lighting during photography and the computer or smartphone you are using.
About plating
- If used on wool (especially white) or genuine leather products, residual gas may cause the product to turn black.
- After high-temperature steaming, allow the product to cool and dry completely before packing it in a bag. Avoid sealing the bag, as this may cause discoloration or rust.
- Chlorine and oxygen bleach cannot be used.
- There may be variations in plating color depending on the lot.
About products compatible with meter detectors
- Although needle detector compatible products are plated for needle detection, there may be cases where the needle detector reacts to the product depending on the size and conditions of use. Please test before use.
About the lining
- We do not inspect the back side because it is a lining.
- When sewing, please be sure to cut the fabric as a whole, as there may be slight differences in color even when dyed in the same batch due to differences in the fabric, dye, and various lots.
- When washing, please use a laundry net.
- When ironing, use a pressing cloth.
About interlining
- When bonding, please use standard pressing conditions. Be sure to conduct a preliminary test using a sample to check the appearance, adhesive strength, fabric strength, etc. before proceeding.
About shoulder pads
- Size: Please use the thickness (shoulder line: thigh) as a guide.
About Slake
- Please note that claims will not be accepted for dyeing or washing the product. *Some products have their own color numbers.
About sheeting
- As this product is randomly wrapped, we cannot accept orders for specific quantities.
- Please note that shipping units are 1 roll.
About sewing tape
- Choose your preferred tape type according to the thickness, texture, and specifications of your fabric. Also, adjust the tape width to match the seam allowance.
About the Inside Belt
- Please choose the type of tape that suits the thickness, texture, and design of the fabric.
About Rubber
- There are variations in size (width) and texture.
- Shipped in units of one roll (reel).
- Allow to stand overnight before use to allow the dimensions to stabilize.
Metal-plated buttons
- If used on wool (especially white) or genuine leather products, residual gas may cause the product to turn black.
- After high-temperature steaming, allow the product to cool and dry completely before packing it in a bag. Avoid sealing the bag, as this may cause discoloration or rust.
- Chlorine and oxygen bleach cannot be used.
- There may be variations in plating color depending on the lot.
About genuine buffalo buttons
- The gloss may fade when washing or sewing at home, or when pressing or ironing during dry cleaning.
About Covered Buttons
- You will need to provide the dough for the walnuts.
| Fabric shipping address: 3-2-11 Higashikanda, Chiyoda-ku, Tokyo 101-0031 |
- The required length of fabric is approximately three times the size of the finished button.
Example: If you want to make 1000 10mm covered buttons, you will need a 3cm x 3cm square piece of fabric for each, so if your fabric is 100cm wide, you will need 1m.
- Depending on the fabric (extremely thin or thick, etc.), wrapping may not be possible, and depending on the processing method (pattern removal, double layering, specified direction, etc.), additional processing fees may be incurred. Please note that we will make a decision after checking the fabric.
- When shipping fabric, please be sure to label it so that you can tell which side is the front and which side is the back. Also, please contact us when you ship.
- The finished size may vary slightly depending on the thickness of the fabric.
- The remaining fabric will be enclosed with the button shipping address, even if the product is shipped directly.
- Please note that depending on the thickness of the fabric, the product number for Linen Walnut may change to a product for thicker fabrics.
About specifying the cover button pattern
- When ordering, please be sure to include the details of the pattern in the contact information.
- If you specify a pattern, an additional processing fee will be charged.
- We will need more fabric than usual. Please send us enough fabric to make three squares of the desired pattern x the number of buttons. It would be a good idea to send us a little more than you need. If you don't have enough fabric, you will need to send us additional fabric.
About the ribbon
- The color may vary slightly depending on the dye lot.
- Due to the characteristics of the product, the displayed width may differ slightly from the actual size.
- High temperature steam, ironing, pressing, etc. may cause discoloration, change in shape, or color transfer.
- Please be aware that dark colored products may transfer color when used in combination with light colored fabrics.
- Please avoid storing the product for long periods in hot and humid conditions, such as in a cardboard box, as this may cause discoloration.
About the tape
- The color may vary slightly depending on the dye lot.
- Due to the characteristics of the product, the displayed width may differ slightly from the actual size.
- High temperature steam, ironing, pressing, etc. may cause discoloration, change in shape, or color transfer.
- Please be aware that dark colored products may transfer color when used in combination with light colored fabrics.
- Please avoid storing the product for long periods in hot and humid conditions, such as in a cardboard box, as this may cause discoloration.
About Blade
- The color may vary slightly depending on the dye lot.
- Due to the characteristics of the product, the displayed width may differ slightly from the actual size.
- High temperature steam, ironing, pressing, etc. may cause discoloration, change in shape, or color transfer.
- Please be aware that dark colored products may transfer color when used in combination with light colored fabrics.
- Please avoid storing the product for long periods in hot and humid conditions, such as in a cardboard box, as this may cause discoloration.
About the cord
- The color may vary slightly depending on the dye lot.
- Due to the characteristics of the product, the displayed width may differ slightly from the actual size.
- High temperature steam, ironing, pressing, etc. may cause discoloration, change in shape, or color transfer.
- Please be aware that dark colored products may transfer color when used in combination with light colored fabrics.
- Please avoid storing the product for long periods in hot and humid conditions, such as in a cardboard box, as this may cause discoloration.
About zippers
- When using with short zippers or tight-fitting pants, please use an auxiliary hook to reduce the strain on the bottom fastener when putting on and taking off the pants.
About locking hooks
- Repeated removal and attachment may cause minor scratches and a slight decrease in the stopper function.
- There will be some variation in strength when attaching and detaching due to the relationship between the spring part and the plating.
About Magnets
- Please refrain from using this product if you are using a pacemaker.
- Keep away from magnetic cards.
- Bringing the device close to a mobile phone, digital watch, etc. may cause it to malfunction.
- Please be careful when using on wool knit fabrics or products made overseas.
About imitation pearls
- The paint film may peel off if it hits or is rubbed against a hard object.
- If used on products sewn overseas or woolen products (especially off-white products), discoloration may occur.
- Avoid dyeing your garment as this may remove the paint, and ask your dry cleaner to wrap it properly in aluminum foil.
About lacto (casein) ingredients
- Since it contains a small amount of formaldehyde, please avoid using it on clothing for infants under 2 years old, underwear, sleepwear, or other clothing that may come into direct contact with the skin.
- Soaking the product overnight may cause it to crack or chip.
About urea resin materials
- Since it contains a small amount of formaldehyde, please avoid using it on clothing for infants under 2 years old, underwear, sleepwear, or other clothing that may come into direct contact with the skin.
- Soaking the product overnight may cause it to crack or chip.
About nylon material
- Direct contact with a press or iron may cause the fabric to melt or deform, so be sure to use a low temperature and a pressing cloth.
About acrylic resin materials
- When storing clothing, be sure to use the insect repellent correctly and follow the dosage and instructions carefully to avoid dissolving or deforming the product.
- If pressed or ironed directly, the fabric may melt or deform, so be sure to use a low temperature pressing cloth.
- For dry cleaning, please specify petroleum-based products.
- It cannot be dyed as it may cause discoloration.
About leather materials
- When washing or cleaning, please remove the item from the clothing as much as possible to avoid losing its shape, discoloration of the paint, or dissolving the paint.
- Ask your dry cleaner to properly wrap your leather parts in aluminum foil.
About natural wood materials
- Please note that due to the characteristics of each natural material, the color and pattern of each piece may vary. Also, because they are made from natural materials, cracks, chips, discoloration, and splinters may occur.
- Ironing or pressing may cause the color of the sap to fade and stain other clothing.
- Some plywood contains small amounts of formaldehyde, so please inquire in advance.
- Generally, dyeing is not possible. (Some products can be dyed with coating, etc.)
About natural materials
- Please note that due to the characteristics of each natural material, the color and pattern of each piece may vary. Also, because they are made from natural materials, cracks, chips, discoloration, and splinters may occur.
- Generally, dyeing is not possible. (Some products can be dyed with coating, etc.)
About epoxy resin materials
- Please note that if heat treatment such as finishing press is performed, there is a risk of deformation, discoloration, or peeling.
About polyacetal material
- If pressed or ironed directly, the fabric may melt or deform, so be sure to use a low temperature pressing cloth.
About polycarbonate material
- If pressed or ironed directly, the fabric may melt or deform, so be sure to use a low temperature pressing cloth.
About polypropylene material
- If pressed or ironed directly, the fabric may melt or deform, so be sure to use a low temperature pressing cloth.
About polyurethane material
- If pressed or ironed directly, the fabric may melt or deform, so be sure to use a low temperature pressing cloth.
- For dry cleaning, please specify petroleum-based products.
About silk material
- Due to the characteristics of silk, there may be unevenness in color and weave, so these are not subject to complaints.
About Ranm sales products
- Randomly wound products are shipped in units of one roll, and we cannot accept orders for a specific number of meters.
- The actual quantity delivered may differ from the number of rolls listed on the product page.
- If you are concerned that you will not have the required number of meters, please enter the required number of meters in the comments section when placing your order.
When ordering the product, we will inform the manufacturer of the required number of meters, and if there is a shortage, we will contact you in advance.
-
If the required number of meters stated in the comments section is not met <br>If the quantity to be shipped is less than the required number of meters, we may ask you to adjust the number of rolls ordered. If an additional quantity is ordered, only the cost of the product will be charged, and no additional shipping charges will be incurred (unless the product is shipped separately). Our staff will provide you with more information.
-
If the required number of meters is not specified in the remarks column
Please note that we cannot accept returns or exchanges due to differences in the number of meters.
If the number of meters delivered is less than you expected and you require more, we apologize for the inconvenience, but we ask that you place a new order.